18650 dual battery sled Features:
- Dual 18650 Battery Holder SMT
- Package: 1,000 pcs per box, tray package.
- Box size: 47×30×20㎜
Troubleshooting: No Voltage Output from 18650 Battery Holder with PCB
If you’ve inserted fresh 18650 cells into the holder but aren’t seeing any voltage output, don’t worry—this is a common scenario, especially with holders equipped with built-in protection circuitry (PCB). Often, the protection circuit remains inactive after the batteries are installed.
How to Resolve:
- Connect the battery holder to your charger or load briefly.
- This step “wakes up” or activates the internal PCB, allowing current to flow as intended.
- Once activated, you should see the expected voltage at the holder’s terminals.
If the issue persists after following these steps, double-check:
- Battery polarity (make sure each cell is installed correctly)
- Contact points inside the holder (look for debris or looseness)
- The charge level of your cells (though you mentioned they’re at 3.6-3.7V, which is normal)
By ensuring proper activation of the PCB, your 18650 battery holder should provide reliable and safe power for your project.
Available 18650 Battery Holder Configurations with PCB
When it comes to battery holders with integrated PCBs, there’s an impressive selection of configurations designed to meet a variety of application needs. Here’s a quick overview of the most commonly available setups:
- 1S1P (Single Series, Single Parallel): Holds one 18650 cell.
- 1S2P (Single Series, Dual Parallel): Accommodates two 18650 cells in parallel.
- 1S3P (Single Series, Triple Parallel): Supports three 18650 cells, all in parallel.
- 1S4P (Single Series, Quad Parallel): Designed for four parallel-connected 18650 cells.
- 2S1P (Dual Series, Single Parallel): Fits two 18650 cells connected in series.
- 2S2P (Dual Series, Dual Parallel): Holds four cells, allowing for a pair of series connections in parallel.
- 3S1P (Triple Series, Single Parallel): Arranged for three cells in series.
- 4S1P (Quad Series, Single Parallel): Holds four 18650 cells connected in series.
These options enable you to select the precise voltage and capacity combination for your project, whether you need extended run time (parallel) or higher voltage (series) configurations. Each configuration typically comes with built-in PCB protection to ensure safer operation and ease of assembly.
Expandable vs. Fixed 18650 Battery Holders: What’s the Difference?
When selecting a battery holder for your project, you’ll notice two common types: expandable and fixed. Understanding the distinctions can help you pick the right fit for your application.
Expandable 18650 Battery Holders:
These holders are designed with modularity in mind. You can easily connect or chain multiple holders together, allowing you to increase your battery arrangement from two cells to three, four, or even more—without the need for specialized hardware. This is great if your power needs might change down the line, or if you like having the flexibility to upgrade your design as your project grows.
Fixed 18650 Battery Holders:
In contrast, fixed holders are built for a specific number of cells. For example, a 2-slot or 3-slot holder can only accommodate that exact quantity. They’re sturdy, reliable, and compact. Fixed holders are ideal when you know your battery setup won’t change, providing a snug fit and straightforward installation.
Quick Comparison:
- Expandable Holders:
- Easily connect more modules for additional capacity
- Adaptable for projects with evolving requirements
- Often used in prototyping or scalable battery packs
- Fixed Holders:
- Designed for a set number of cells (e.g., 2 or 3)
- Compact and robust configuration
- Great for finalized designs where cell count stays the same
Choosing between them depends on whether your battery configuration is set in stone or might need to grow. If flexibility is your priority, expandable options have you covered. For streamlined, no-fuss assembly, fixed holders deliver reliability and simplicity.
Similar Product you may be interested :
Click Here for one Cell 18650 Battery Holder, Gold plating,SMT Type.
Click Here for the Through-hole Mount Dual 18650 Battery Holder.
Click Here for 18650 Metal Holder .
Couldn’t find what you’re looking for?
Contact us here. We’ll response you within 12 hours.
