-
What are Spring Loaded Pins?
JIATEL spring-loaded pins, also known as Spring-Loaded Contacts, or Pogo Pins, are an alternative interconnect solution for transmitting an electrical connection through its contact points. JIATEL’s spring-loaded pins consist of a precision machined plunger, body, and cap, along with an internal spring which provides a range of mechanical movement when assembled. JIATEL offers many options for spring-loaded pins that incorporate different compressions, diameters, overall heights, as well as spring force. Due to JIATEL’s precision machining capabilities and extremely tight tolerances, a highly durable electrical connection can be achieved.
-
How do Spring-Loaded Pins work?
In a spring-loaded pin application, the plunger engages with a mating target contact and creates a surface pressure connection. As the spring is compressed and force is applied, the plunger moves inside the body. The primary path of travel is through the gold-plated outer components and the electrical interconnect relies on the force of the internal spring to maintain contact between the plunger and the mating component. The further the plunger is compressed; the more force will be applied at this single connection point which will result in greater electrical performance.
-
What are Spring-Loaded Pins used for?
Spring-loaded pins can be used in many electrical interconnect applications. JIATEL offers spring-loaded pins in multiple configurations and stroke options which can be beneficial in applications with large stack up tolerances. Spring loaded pins are ideal for blind mating applications as the only connection required is for the plunger to engage with a mating target contact or contact pad. Whether the application is a simple board to board interconnect, or a more modular connection, JIATEL has spring-loaded pins for your application.
-
What is the maximum stroke JIATEL spring-loaded pins can provide?
JIATEL offers standard spring-loaded pins with up to .118” [3mm] of maximum stroke.
-
What is the recommended compression/travel range for JIATEL spring-loaded pins?
JIATEL recommends their spring-loaded pins operate at mid-stroke compression for optimal electrical and mechanical performance.
-
Are JIATEL spring-loaded pins sealed or waterproof?
JIATEL spring-loaded pins are not IP rated but they have been used in waterproof/IP rated applications. A typical JIATEL spring-loaded pin consists of 4 precision machined components. When a spring-loaded pin is compressed, the plunger will move inwards, residing inside the pin’s connector body. This movement will create an entry point for liquids or contaminants. For waterproof applications, JIATEL spring-loaded pins can be installed into their own sealed housing that utilizes gaskets or O-Rings to create a sealed environment for the pins to function. For more information, contact us.
-
Can JIATEL spring-loaded pins be subjected to washdown procedures?
While we do not provide any formal guidelines regarding washing down of our parts, we are aware of customers that have successfully performed this type of operation by using mild cleaning solutions, such as soap and deionized water. If your application requires the use of more aggressive cleaning solutions or procedures, we suggest testing it to ensure that it does not damage the spring-loaded pin or the gold plating finish. You also want to avoid using any solutions that will leave a residue that may hinder the movement of the plunger and/or internal spring.
-
How many cycles are JIATEL spring-loaded pins tested to?
Most JIATEL spring-loaded pins are tested between 50,000 to 1,00,000 cycles at the recommended mid-stroke compression.
-
What is the highest current rated spring-loaded pin JIATEL can offer?
JIATEL offers discrete spring-loaded pins that are rated for a maximum of 6A and derated to 4.8A. The derated current is to ensure safety margins for the product and is a 20% reduction of the maximum current. For more information on interpreting derating curves check out our Application Note – Interpreting Current – Temperature Derating Curves.
-
Can JIATEL spring-loaded pins mate with a dedicated pad on the opposing surface?
JIATEL spring-loaded pins can mate with any conductive surface. For optimal electrical and mechanical performance, we recommend mating against our dedicated target contacts and target discs.
-
Are JIATEL spring-loaded pins or connectors lubricated?
JIATEL Spring-Loaded Connectors are not lubricated. Customers have used light viscosity, thin metal oils in the past and have had success. Typical applications do not require lubrication.
-
Are JIATEL spring-loaded pins and connectors available on tape and reel?
Most discrete spring-loaded pins can be packaged on tape and reel. Some factors that determine whether a part is suitable for tape & reel packaging include overall length, largest diameter, retention features etc.
Some JIATEL spring-loaded connectors are available on tape and reel with a pick and place clip. -
Do spring-loaded pins on tape and reel require a Pick and Place Cap?
Most spring-loaded pins are suitable for automatic pick and place so long as a suitable pick and place nozzle is used, however JIATEL offers options with a cap. Several JIATEL series include a pick and place cap to aid with assembly.
-
Are there alternative plunger styles for JIATEL spring-loaded pins?
Most of JIATEL’s spring-loaded pins have a plunger with a radius on the tip, however we can also provide flat and pointed tip plungers as an alternative option for most spring-loaded pins.
-
Can JIATEL spring-loaded pins be customized?
It is possible to modify existing JIATEL spring-loaded pin designs as well as create completely new designs upon additional review with manufacturing. Most JIATEL spring-loaded pins consist of 3 precision machined components and a spring. Modifying a spring-loaded pin will carry a one-time NRE tooling charge. There would be a MOQ of 1000 pieces for a custom spring-loaded pin. For more information view our Custom Capabilities.
